tr Skip to content
Black Friday FlowMattic for life, 12 payments of $33.25 Or $399 once. Nothing added for splitting Ends in --Days --Hrs --Min --Sec See the deal

Connect VerifyBee and Google Sheets

Find bad addresses before you send. FlowMattic passes each email in your Google Sheet to VerifyBee and writes the result back beside it, for new rows as they arrive or for an old list in batches. For marketers and list owners who keep subscribers or leads in a spreadsheet.

6 triggers 20 actions 5 example workflows 1 ready-made template Unlimited runs

Try a pairing

When this happens in Google Sheets6 triggers

Do this in VerifyBee1 action

1. TriggerNew Spreadsheet Row
2. ActionVerify Email

When Google Sheets fires New Spreadsheet Row, FlowMattic runs Verify Email in VerifyBee with the data from that event.

You build this in the FlowMattic workflow builder on your own site. See the setup steps

VerifyBee and Google Sheets workflows you can build

Each one uses only triggers and actions the two integrations ship today, plus FlowMattic's own tools. Where the library has a ready-made template, import it instead of building from scratch.

VerifyBee app icon Google Sheets app icon

Verify each new email and write the result in its row

A new row's email goes to VerifyBee, and Update Row fills a Status column, so you can sort out risky addresses before the next campaign.

New Spreadsheet RowVerify EmailUpdate Row

VerifyBee app icon Google Sheets app icon

Clean an old list a batch at a time

A Schedule reads a batch of unchecked rows, the Iterator verifies each address and Update Row records the result, so a large list is worked through over a few days.

ScheduleGet RowsIteratorVerify EmailUpdate Row

VerifyBee app icon Google Sheets app icon

Split verified and rejected addresses into two tabs

After Verify Email, a Router writes deliverable addresses to a Clean tab and the rest to a Rejected tab, so the export for your email tool is ready to use.

New Spreadsheet RowVerify EmailRouterAdd New Row

VerifyBee app icon Google Sheets app icon

Re-check an address when someone corrects it

When the Email column is edited, Verify Email runs again and Update Cell Data replaces the old result, so fixed typos are not left marked invalid.

Update Specific Column ValueVerify EmailUpdate Cell Data

VerifyBee app icon Google Sheets app icon

Verify signups from any form before they reach the sheet

A Webhook receives signups from a landing page or another app, VerifyBee checks the email and only addresses that pass a Filter are written as rows.

WebhookVerify EmailFilterAdd New Row

Set up: verify each new email

At the end, every email added to your sheet is checked by VerifyBee and its result is written next to it.

  1. Add result columns

    Next to the Email column, add Status and Checked columns for VerifyBee's answer and the date.

  2. Connect both apps

    Under Connects in FlowMattic, add VerifyBee with your VerifyBee API key and Google Sheets with an account that can edit the sheet.

  3. Start with New Spreadsheet Row

    Create a workflow with Google Sheets and New Spreadsheet Row, choose the spreadsheet and tab, and capture a sample row.

  4. Verify the email

    Add VerifyBee Verify Email and map the row's Email column, then test the step to see the result fields.

  5. Write the result back

    Add Google Sheets Update Row for the same row, map the result into Status and the date into Checked, test it and switch the workflow on.

Verify each new email and write the result in its row
  1. Google Sheets app icon 1. Trigger in Google Sheets New Spreadsheet Row
  2. VerifyBee app icon 2. Action in VerifyBee Verify Email
  3. Google Sheets app icon 3. Action in Google Sheets Update Row

    Fields mapped from the earlier steps (a typical setup)

    From Google SheetsTo Google Sheets
    Email columnEmail to verify
    Verification resultStatus column
    Run dateChecked column
Built on the FlowMattic canvas. Test each step with real data, then switch the workflow on.

Triggers and actions in this pair

A trigger starts a workflow. An action is something FlowMattic does in the app as a step.

Good to know

  • These workflows start from the sheet, a Schedule or a Webhook and call VerifyBee's Verify Email, one address per run of the step.
  • Each check is a call to your VerifyBee account. Test on a handful of rows before you point a Schedule at a list of thousands.
  • Use New Spreadsheet Row, not New Or Updated Spreadsheet Row, when the workflow writes its result into the same sheet, or each write can start another check.
VerifyBee app icon

VerifyBee

Integration page

Actions (1)

  • Verify EmailVerify a single email address
Google Sheets app icon

Google Sheets

Integration page

Triggers (6)

  • New Spreadsheet RowTrigger when a new row is added to the spreadsheet
  • New Or Updated Spreadsheet RowTrigger when a row is updated in the spreadsheet
  • Deleted Spreadsheet RowTrigger when a row is deleted from the spreadsheet
  • Update Cell DataTrigger when any cell is updated in the spreadsheet
  • Update Specific Cell DataTrigger when a specific cell is updated in the spreadsheet
  • Update Specific Column ValueTrigger when a specific column value is updated in the spreadsheet

Actions (19)

  • Add New RowAdd a new row with mapped data
  • Update RowUpdate existing row in specific spreadsheet with mapped data
  • Delete RowDelete row by ID in specific spreadsheet
  • Clear Row DataClear data or row by ID in specific spreadsheet
  • Lookup Row DataSearch for data in specific spreadsheet
  • Get Cell DataGet data for particular cell in specific spreadsheet
  • Update Cell DataUpdate data for particular cell in specific spreadsheet
  • Get Row CountGet total number of rows in specific spreadsheet
  • Get Row DataGet rows data from the sheet based on specified range
  • Create Spreadsheet ColumnCreate a new column in specific spreadsheet
  • Create New SheetCreate a new sheet in specific spreadsheet
  • Import CSV or JSON to Existing SheetImport CSV or JSON data to existing sheet in specific spreadsheet
  • Copy SheetCopy a sheet to another or within the same spreadsheet
  • Get RowsRetrieve rows in JSON format for use with Iterator
  • Export sheet to CSVExport the selected sheet to CSV format and save to WordPress Media Library
  • Export Sheet to ExcelExport the spreadsheet to Excel (.xlsx) format and save to WordPress Media Library
  • Export Sheet to PDFExport the spreadsheet to PDF format and save to WordPress Media Library
  • Export Sheet to OpenDocumentExport the spreadsheet to OpenDocument (.ods) format and save to WordPress Media Library
  • Export Sheet to TSVExport the selected sheet to TSV format and save to WordPress Media Library

Why run this pair with FlowMattic

VerifyBee and Google Sheets connect through FlowMattic on your own site, with no separate automation account in the middle and no charge per run.

Results stay with the list

Each address gets its verdict in the same row, so filtering out bad emails is one sort in the sheet.

Large lists in small batches

Runs are unlimited in FlowMattic, so a Schedule can work through a big list a slice at a time with no task allowance to watch.

Addresses stay on your server

The workflow runs on your own WordPress site, so the list goes only to Google and VerifyBee.

Common questions

Can I verify the email addresses in a Google Sheet automatically?

Yes. Start a workflow with New Spreadsheet Row, send the Email column to VerifyBee's Verify Email, and write the result back with Update Row. Every new row is checked as it is added.

How do I check a list that is already in the sheet?

Use a Schedule with Get Rows to read a batch of rows without a status, an Iterator to go through them, Verify Email for each and Update Row to save each result.

Can I keep only valid addresses?

Yes. After Verify Email, add a Router or Filter on the result. Write deliverable addresses to a clean tab, or clear the rejected ones with Clear Row Data.

Can I verify addresses before they ever reach the sheet?

Yes. Catch the signup with a Webhook step, run Verify Email, then use a Filter so only addresses that pass are added with Add New Row.

Which result values can I write to the sheet?

Whatever Verify Email returns when you test it. Test the step with a known good and a known bad address, then map the fields you want into your columns.

Did not find your answer? You can browse the help center or ask us directly.

Start automating VerifyBee and Google Sheets

Install FlowMattic, connect both accounts and import a template. Every run stays on your own server.

30-day money-back guarantee Unlimited workflows and runs Self-hosted

Reviewed 27 Oct 2026. The example workflows are written with AI from the real triggers and actions of both integrations and checked against them. VerifyBee integration 1.0, Google Sheets integration 2.2.4.